Locally owned and operated in Beaver, Utah
Garage, shop, patio and deck coatings across Southern Utah — ground to profile, installed in one to three days, and built to take hot tires, road salt and freeze-thaw.
Services
Every job starts the same way — we open the concrete up mechanically so the coating has something to key into. What goes on top is your call.
Top-of-the-line, economical and low maintenance — the feel of an interior room you can drive on. We are in and out in one to three days so you can get back to using your garage.
The high-end finish. Metallic pigments move through the topcoat as it cures, so the floor reads like poured stone and no two are the same. This is the one that turns a slab into the feature of the room.
Grinding, densifying and honing the concrete itself to a smooth surface, stepping up through progressively finer diamond grits. No coating to peel — the floor is the finish.
The appearance of expensive flooring at a fraction of the cost. A durable, permanent stain that soaks into the slab rather than sitting on it, then gets sealed — elegant, and it asks very little of you afterwards.
A polymerized, cement-based protective coating that goes over concrete, wood or tile. If the slab is tired rather than failed, an overlay gets you a like-new surface for a fraction of replacement.
Utah weather brings enough precipitation to be worth taking seriously. A waterproof coating seals the deck surface so water stops finding its way into the structure underneath.
How it works
We look at the actual concrete — moisture, cracks, oil, what it is going to be asked to do — then quote the system that suits it. Free, and no obligation.
We open the surface up mechanically rather than acid etching it, and repair what needs repairing. This is the step that decides whether a floor lasts a decade or a season.
Base coat, broadcast or pigment, then the topcoat that does the real work against tires, salt and UV. Most residential jobs are done in one to three days.
Our work
Garages, shops, patios and decks across Southern Utah.
Who you are hiring
Pro Basin Coatings was founded by Tristin Cox, who grew up with deep roots in this community and still puts his own name on every job. He is a family man — married, with a young daughter — and he brings the same standard to a customer's garage that he would want in his own.
We use quality materials and proper mechanical prep, and we would rather tell you a slab needs repair first than coat over a problem.
Talk to TristinService area
Based in Beaver and working across the region. If your town is not on the list, call anyway — we travel for the right job.
Tell us about the slab and what you want it to do. We will walk it with you and put a number on it — no charge, no pressure.
Or call801.808.2123
Testimonials
Super happy with my garage floor!! A beautiful job. Wouldn't hesitate to highly recommend them! You won't be disappointed!
Tristin was great to work with. There was a small problem with the coating that was given to me for the floor (not his fault) and he went above and beyond to make sure everything came out amazing and find me another coating that did what I wanted. I would recommend him to anyone, and would use him again.
Pro Basin Coatings was excellent to work with. They were professional, quick and the product results are fantastic. Great communication and reliability. I would recommend these guys to anyone.
Tristin installed a custom floor in my new shop and it is as good as he said it would be. The quality of work is excellent and I can't wait for him to do my primary garage! Service was prompt and personal. Highly recommended!
Most residential garages are a one to three day job, start to finish. Prep and grinding take the first day, coating follows, and then the floor needs cure time before you drive on it. We will give you the exact schedule when we quote the job.
A coating is only as good as the surface underneath it. Mechanically grinding the slab opens up a profile for the resin to key into, which is what stops peeling later. Acid etching is faster and far less reliable — we grind.
Not with the right system. Hot tire pickup is what happens when a thin, consumer-grade coating is laid over unprepared concrete. Proper prep plus a topcoat rated for vehicle traffic is the combination that holds up.
Usually not. Cracks and surface damage get repaired as part of prep, and if the slab is tired rather than structurally failed, a concrete overlay can give you a like-new surface for a fraction of the cost of replacement.
Polishing finishes the concrete itself — we grind, densify and hone the slab so the floor is the finish, with nothing on top that can peel. A coating adds a new resin surface over the concrete, which is what lets you choose flake, metallic or a solid color.
Yes — we cover Southern Utah, including Cedar City, St. George, Hurricane, Washington, Ivins, Santa Clara and La Verkin. If you are somewhere nearby that is not on that list, call and ask.
Call 801.808.2123, email ProBasinCoatings@gmail.com, or send the contact form. We will arrange a time to look at the slab in person — quotes are free and there is no obligation.
Free quotes across Southern Utah. Tell us what the slab is doing and we will tell you honestly what it needs.
